6 Ton Rice Husk Biomass Boiler in Bengal

In the working process of 6 ton rice husk biomass boiler, the fuel is sent to the furnace by the screw feeder. Here, due to the effect of high-temperature flue gas and primary wind, the fuel is gradually preheated, dried, ignited and burned. In this process, a large amount of volatiles are precipitated and the combustion is intense. After the high temperature flue gas scour the main heating surface of the boiler, it enters the economizer and air preheater of the heating surface at the tail of the boiler, and then enters the dust collector and is discharged into the atmosphere through the chimney. Ungasified fuel moves toward the back of the grate until it burns out, leaving a small amount of ash and slag to fall into the slag eliminator behind the grate.

Characteristics of Rice Husk Boiler

1. Energy saving. Compared with coal-fired boilers, biomass briquetting fuel has higher utilization efficiency and better thermal efficiency. Biomass molding fuel ignition point is low, so easy ignition, quick fire, stable combustion complete, fuel saving.
2. Environmental protection. Zero carbon dioxide emissions, no smoke and tar when burning, fuel can be completely burned, and finally only a little white ash. Clean and pollution-free, conducive to health, biomass emissions is 1/10 of coal, far lower than the national emission standards.
3. Economic convenience. Compared with coal, biomass briquetting fuel is cheap and economical, with wide sources and convenient storage. High degree of automation, low operation labor intensity.
4. Wide application scope. Due to the wide source of raw materials environmental protection, so widely used in large and medium-sized cities with strict environmental requirements of industrial production and manufacturing, hotels, hotels, bath centers, institutions, hospitals, schools and other industries.

Biomass boiler can use biomass pellet and biomass compression molding biomass fuel. Of course, non-molding biomass fuels such as straw, straw, rice husk, peanut shell, corn cob, oil tea shell, cottonseed shell, branches, tree bark, wet bamboo skin, tobacco stalk, coconut shell, sugarcane skin, bagasse, furfural residue, distiller’s grains, waste bacteria bag, sawdust, and other agricultural and forestry wastes can also be directly burned.

Bio-energy Co., Ltd. has built several production lines with an annual output of 20,000 tons of furfural, 80,000 tons of cellulose, and 100,000 tons of biomass sugar liquid. The products are widely used in papermaking, xylose resin, adhesives, petroleum, medicine and other industries. According to the characteristics of biomass straw, through scientific numerical simulation, the furnace arch, furnace wall and furnace chamber heating surface of SZL series biomass steam boiler are reasonably arranged to ensure the combustion efficiency and designed evaporation capacity of the boiler. At the same time, for environmental protection purposes, ZOZEN boiler adopts low nitrogen combustion + pulsed bag-dust collector for biomass boiler flue gas, which is then discharged through a 45m high exhaust cylinder, in line with the strict environmental protection policy. With its remarkable technical advantages, high efficiency and environmental protection, and scientific and detailed system plan, ZOZEN boiler has successfully become the steam boiler equipment supplier of Bio-energy Co., Ltd., and will effectively reduce the environmental pollution and social problems caused by straw burning.

ZOZEN biomass has more than 30 years of experience in designing and manufacturing industrial boiler products. Our oil – and gas-fired boilers have a thermal efficiency of 98%. Each product is subjected to strict inspection to ensure high quality of the boiler. We have a 7*24 hours online customer service team, if you have any questions, please feel free to contact us!