Diesel Oil Water Tube Boiler Manufacturing

ZOZEN manufacture diesel oil water tube boiler production base in more than 20 tons per hour, SZS type oil water tube boiler in the most popular, and it compared with fire tube boiler, on the structure of large diameter drum, elastic bending pipe instead of the straight pipe, in order to improve the boiler capacity, increase the heating surface and steam parameters.

Water tube boiler is mainly composed of upper and lower horizontal drum, convection tube bundle, water wall tube, down tube and collection box and other pressure components. The front part of the boiler is the furnace, and the water wall is arranged around the furnace. The upper and lower horizontal drum is located at the back of the furnace, and the two drums are connected by a curved water pipe. Combustion equipment mostly uses chain grate, some for pulverized coal furnace or boiling furnace, equipped with superheater, economizer and air preheater. High temperature flue gas from the upper back of the furnace through the superheater into the convection flue, first downward and upward upward S-shaped rise, transverse wash convection tube bunch, reach the upper and then fold down into the tail flue, through the economizer, air preheater, by induced draft fan, chimney into the atmosphere.

Advantages of horizontal water tube boiler

1. The furnace of water tube boiler is placed outside the cylinder body, and the volume of the furnace can be large or small, which can meet the requirements of combustion and increasing evaporation.
2. Tube boiler drum is generally not directly heated, in order to accommodate water vapor pipe placed in the furnace, flue as the heating surface, heat transfer performance and safety performance has been significantly improved.
3. Water pipe boiler water preheating, steam and steam overheating in the heating surface economizer, water wall and convection tube bundle, superheater
4. Water vapor system, combustion system and auxiliary system of water tube boiler are complex, but the structure of single pressure components of water tube boiler is simple.
5. Water tube boiler because of water preheating, soda and steam overheating are completed in the pipe, pipe scaling is difficult to remove, so the water tube boiler has higher requirements for water quality, operation, management level is also higher.

Medical gloves and protective clothing provide full protection for health care workers on the ground as the Covid-19 epidemic spreads around the world. As important supporting equipment in the production process of gloves and protective clothing, industrial boiler provides sufficient heat source guarantee. Ansell purchased the ZOZEN diesel oil fired steam boiler from its production base in Dominica. It is a three-return horizontal internal combustion boiler developed and designed by ZOZEN Boiler. It is compact in structure, high in thermal efficiency and low in energy consumption, and has strong market competitiveness. At the same time, in order to ensure the quality of the boiler, the SZS series of oil-fired boiler tube plate using the first expansion after welding manufacturing process, and the expansion contact point is set as the stop point, inspection qualified before entering the next welding process, to ensure the zero gap between the pipe hole and the outer wall of the pipe. In addition, through automatic control expansion relay, to ensure the expansion of uniform, but expansion. In the whole manufacturing process of ZOZEN Boiler, strict and perfect quality management system, to ensure that every boiler is high quality, has been recognized by Ansell.

ZOZEN Boiler products are well received by many customers in the food industry. Each boiler is inspected strictly before leaving the factory to ensure that there is no fault in the process of use by customers. Gas superheated steam boiler not only output sufficient, thermal efficiency up to 98%, but also has excellent safety performance. Whether you are interested in our company or our products, please feel free to contact us.